35
[ EQUALIZER ]
You can use the equalizer to (extra) amplify the treble or bass levels. This
tone control is disabled when set to ‘natural’
[ TAAL ]
Here you can set the language in which the various messages are dis-
played on the display.
You can restore a known language as follows in case you’ve set an un-
known language accidentally:
1. press:
2. now use
and
to select the desired language
3. press to conrm
[ HS NAAM ]
Use this option to assign a personal name to the handset of up to 12 char-
acters. Use the C button to delete the old name.
See paragraph 7.7 for all available characters.
[ DISPLAY ]
Here you can determine whether the handset name or actual time must be
shown with the handset in standby mode.
[ AUT.ANTW ]
Here you can determine whether an incoming call can be answered direct-
ly by picking up the receiver from the base or charger. With this function
disabled, you must always press the Call button to accept incoming calls.
[ SNELKEUZ ]
Here you can enter numbers for the direct memory buttons M1, M2 and M3.
By pressing and holding these buttons in standby mode, the assigned number
will be dialled directly.
To Next Page
Loading...
