G.A.S ENVIRO - Dehumidifier Settings; Setting Day;Night Dehumidify Values; Adjusting Dehumidify Value; Dehumidifier Bandwidth Configuration

14
EXIT 1 AND 2 SETTINGS
USING YOUR
13 AMP ENVIRO CONTROLLER
DEHUMIDIFY SETTING
With a dehumidifier connected to Exit 1 or Exit 2:
From the Set exit 1 or Set exit 2 Settings Menu (as
detailed on page 12), press DOWN and scroll down to
‘Dehumidify’.
With ‘Dehumidify’ blinking, press ENTER to access the
humidifier settings.
Use the UP and DOWN arrows to select Dehumidify Day,
Dehumidify Night or Band width.
With your chosen selection blinking press ENTER to highlight
the corresponding value.
Use the UP and DOWN arrows to change the value.
Press SAVE EXIT to save your information, and to go back
to the previous sub menu.
DEHUMIDIFY SETTING BAND WIDTH
The controller can be programmed to turn the
dehumidifier on whenever it drops below your set value.
The band width is how many % the humidity can drop
below the set humidity value before the dehumidifier is
turned back on. In the example to the right, during the
day the dehumidifier will turn on at 60% and turn back
off at 50% (band width set to 10%).
Humidify
Timer
Dehumidify
Heat
Power
EXIT 1 AND EXIT 2 DEHUMIDIFY MENU
Select Set exit 1 or Set exit 2 settings as detailed on page 12
to access Dehumidify Settings
Press
ENTER
Pr
essing will save your entry and go back to the previous menu
SAVE
EXIT
Press
to scroll down to Dehumidify
Exit1 Dehumidify
Dehumidi day 60%
Dehumidi day 60%
Dehumi night 50%
Band width 10%
to highlight the corresponding value
Press
ENTER
Press
to make your selection
Press to change value
SET TIMER FUNCTION
Allows you to programme Exit 1 or Exit 2 to
turn off at a specific time
You must specify on time and off time.
NOT ON TIME & DURATION.
The timer works on a 24 hour clock and you
can set 23 different times.
From the Set exit 1 or Set exit 2 Settings Menu
(as detailed on page 12), press DOWN and scroll down
to ‘Timer.
With ‘Timer’ blinking, press ENTER to access the timer
settings.
Use the UP and DOWN arrows to select your chosen
setting from 1 to 23.
With your chosen selection blinking press ENTER to
highlight the corresponding ON TIME value.
Use the UP and DOWN arrows to change the value.
Press ENTER highlight the next value.
Press SAVE EXIT to save your information. Press SAVE
EXIT again to go back to the previous sub menu.
Humidify
Timer
Dehumidify
Heat
Power
EXIT 1 AND EXIT 2 DEHUMIDIFY MENU
Select Set exit 1 or Set exit 2 settings as detailed on page 12
to access Dehumidify Settings
Press
ENTER
Press
to scroll down to Dehumidify
to highlight the first value
Press
ENTER
ON TIME
hours : mins
OFF TIME
hours : mins : secs
to highlight the next value
Press
ENTER
Press
to make your selection from 1 to 23
Press to change value
Pressing will save your entry.
SAVE
EXIT
Press again to go back to the previous menu
SAVE
EXIT
Exit1 timer 1
0:00 00:00:00
Exit1 timer 1
0:00 00:00:00