G.A.S ENVIRO - Exit 1 & 2 Functionality; Connecting a Heater; Connecting a Humidifier; Connecting a Dehumidifier

12
EXIT 1 AND 2 SETTINGS
USING YOUR
13 AMP ENVIRO CONTROLLER
This menu allows you to change the settings of
items connected to exits 1 and 2 such as:
• A heater
• A humidifier
• A dehumdifier
TO ACCESS THE EXIT 1 OR EXIT 2
SETTINGS MENU
From the Main Menu – Home Screen press ENTER
to access the sub menus.
‘Set fan Settings’ and ‘Set exit 1’ will be displayed.
Press the DOWN arrow to scroll down to Set exit 1
or Set exit 2.
With ’Set exit 1 or Set exit 2’ blinking, press ENTER
Press
to scroll down the sub menus
Pr
ess
to scroll down to Set exit 1 or Set exit
2
Fan settings
Set exit 1
Set exit 2
General settings
Room=23°C RH=60%
Set19°C 09:13
Start from the Main Menu – Home Screen
ACCESSING EXIT 1 AND EXIT 2 SETTINGS
to access the first sub menu
Press
ENTER
ENTER
to access Exit 1 or Exit 2
Press
ENTER
to access functions
Press
Choose function is displayed.
Choose function
Humidify
Timer
Dehumidify
Heat
Power
POWER ON / OFF SETTING
From the Set exit 1 or Set exit 2 Settings Menu
(as detailed above), press DOWN and scroll down
to ‘Power’.
With ‘Power’ blinking, press ENTER to access the
power settings.
Use the UP and DOWN arrows to select OFF or ON.
Press SAVE EXIT to save your information, and to go
back to the previous sub menu.
Humidify
Timer
Dehumidify
Heat
Power
EXIT 1 AND EXIT 2 POWER MENU
Select Set exit 1 or Set exit 2 settings as detailed above
Press
to make your selection
to access Power Settings
Press
ENTER
Pr
essing will save your entry and go back to the previous menu
SAVE
EXIT
Press
to scroll down to Power
Ex1 off
Ex1 on