7
Way of connecting
Scheme No. 1 (on the inside front cover of the manual) shows the way of connecting in
mode one input – four outputs (Y IN/ABCD OUT).
Scheme No. 2 (on the inside back cover of the manual) shows the way of connecting in
mode four inputs – one output (ABCD IN/Y OUT).
The scheme on next page shows the use of two Line Midi Switchers for preamps
switching, especially those of them possessing the connection between signal ground
and grounding. In both of LMS-1 switchers should be set the same MIDI channel what
will assure synchronic switching.
To Next Page
Loading...
