G-Prject G-BOOM - BLUETOOTH OPERATION; Pairing and Connecting Devices

To Next Page

To Previous Page

WIRELESS BLUETOOTH BOOMBOX

G-BOOMG-BOOM

BLUETOOTH OPERATION

You can stream audio wirelessly to G-BOOM from up to 33’ away using your iPhone,

iPad, iPod, Android, laptop or other A2DP Bluetooth enabled device.

1 Press the Power Button to turn on G-BOOM.

2 Then press the Pair Button. The blue LED on G-BOOM will ash.

3 Turn on your A2DP Bluetooth device and enable Bluetooth.

4 Search for Bluetooth devices and select “G-BOOM”.

5 The Blue LED on G-BOOM will change from ashing to solid, indicating that

your Bluetooth device is connected to G-BOOM

NOTES:

•

Press and hold the Pair Button for 3 seconds to disconnect the Bluetooth connection

•

G-BOOM will return to pairing mode and the Blue LED will ash

•

If asked for a password, enter ‘0000’