G-Prject G-BOOM - TROUBLESHOOTING; Common Issues and Solutions

To Next Page

To Previous Page

TROUBLESHOOTING

Solution

Lower the volume on G-BOOM and/or audio source

Turn up the volume on G-BOOM and/or audio source

Recharge the batteries using the included Power Adapter

If using Bluetooth, move the audio source and G-BOOM closer together

(within the 33’ range)

Unpair G-BOOM from your Bluetooth device, then re-pair following the

steps in the section BLUETOOTH OPERATION

Conrm your device is A2DP Bluetooth compatible. Ensure that both your

Bluetooth device and G-BOOM are not connected to any other devices

If G-BOOM is connected to a Line In source, the Bluetooth will not function.

Unplug the 3.5mm Line In cable and press the Pair Button to switch to

Bluetooth mode

Unpair G-BOOM from your Bluetooth device, then re-pair following the

steps in the section BLUETOOTH OPERATION

Issue

Distortion

Not loud enough

Intermittent sound

Cannot play audio

via Bluetooth