RECONNECTING YOUR
BLUETOOTH DEVICES
Once your Bluetooth device has been paired with G-BOOM, it is simple to
reconnect them.
1 Make sure that G-BOOM is powered on and within range.
2 Select “G-BOOM” from the list on your Bluetooth device.
3 The Blue LED on G-BOOM will change from ashing to solid, indicating that
your Bluetooth device is reconnected to G-BOOM
NOTES:
•
For best audio performance, turn the volume on your Bluetooth source device all the way up
•
G-BOOM can only play audio from one source at a time. If G-BOOM is connected to a
Line In source, the Bluetooth will not function. Simply unplug the 3.5mm Line In audio cable
and press the Pair Button to switch to Bluetooth (if necessary, select “G-BOOM” on your
Bluetooth device).
To Next Page
Loading...