G-Tec g-USBamp - Switching off and Storage of G.usbamp

g.tec medical engineering GmbH g.USBamp, USB Biosignal Amplifier: Instruction for use
____________________________________________________________________________________________________________________
V2.16.09
Page 18
Switching off and storage of g.USBamp
To switch off g.USBamp and to store the device correctly, please perform the following steps:
Step 1: Switch off the device with the switch on the rear side (switch position OFF). The green LED is
off.
Step 2: Disconnect all electrodes.
Step 3: Disconnect the power supply cable.
Step 4: Disconnect the USB cable.
Step 5: Disconnect the power cord from the medical power supply.