G-Tec g-USBamp - 10 General Notes

g.tec medical engineering GmbH g.USBamp, USB Biosignal Amplifier: Instruction for use
____________________________________________________________________________________________________________________
V2.16.09
Page 19
10 General notes
Classification
Safety class II
Type of applied part CF
Protection against mechanical distortion and liquids IP41
Operation mode S1 (permanent operation)
Transportation and storage conditions
The device can be stored at temperatures between –20 to +60 degrees Celsius. The relative humidity
must be between 25 % and 95 %. Wait before usage of the device till condensed water disappeared
(wait at least 1h in a heated room).
Location details
Do not use the device near a heating system or directly in the sun. The maximal temperature of the
environment must not be above 40  Celsius or below 5 ° Celsius.
Waste disposal details
Bring the device to a recycling center or sent it back to the manufacturer.
Cleaning
You can clean the device carefully with medical rubbing alcohol. Liquid must not enter the g.USBamp.