G-Tec g-USBamp - Medical Power Supply; 13 PIN Assignment

g.tec medical engineering GmbH g.USBamp, USB Biosignal Amplifier: Instruction for use
____________________________________________________________________________________________________________________
V2.16.09
Page 23
ADC clock extern - Sensitivity: 0 - 5 V
ADC clock extern + Sensitivity: 0 - 5 V
Digital outputs at SYNC OUT
ADC sclock extern - Sensitivity: 0 – 3.3 V
ADC sclock extern + Sensitivity: 0 – 3.3 V
ADC clock out - Sensitivity: 0 – 3.3 V
ADC clock out + Sensitivity: 0 – 3.3 V
Medical power supply
Isolated medical power supply
Rated power consumption 30 VA
Rated AC voltage (input) 100-240 V
Rated frequency 50-60 Hz
Rated DC voltage (output) 5 V
Rated DC current 6 A
Maximum voltage on Power Supply connector 5 V DC
Producer GlobTek, Inc.
186 Veterans Drive, Northvale, NJ, 07647, USA
Reseller GlobTek, Inc. Germany
Hafenweg 26a, 48155 Münster, Germany
Model number GTM21097-3005
13 PIN assignment
Pin 1 is marked with a special surrounding in the pictures. Then the numbering follows the indicated
line.
g.USBamp