p.40
Maintenance for Your Drive
8. Click on the Partition button to continue. A progress bar in the lower-right corner of the
window will show you the progress of the disk’s reformatting.
9. When partitioning is complete, the multiple partitions will be displayed in the left panel of
Disk Utility.
10. Quit the Disk Utility program. After re-initializing the drive, the custom icon for the
G-Technology drive has been erased. To restore the G-RAID with Thunderbolt icon for each
partition follow the steps from the
Restore the Drive Icon section.
11. The multiple partitions of the G-Technology drive will be displayed on your desktop. Your
drive is now set up with two or more partitions and is ready for use.
To Next Page
Loading...
