p.34
Maintenance for Your Drive
Restore the Drive Icon
If the G-RAID with Thunderbolt drive icon was erased during the conguration process (see the
previous section), you can restore the icon with the following easy steps.
NOTE: This process is not required for the operation of the G-RAID with Thunderbolt. However, it
will make your drive’s appearance on the computer desktop look cleaner and more accurate.
1. To get the G-Technology icon package, go to
www.g-technology.com/support and
navigate to your product. There will be a link to download the icons on the product
support page.
2. Once downloaded, the G-Technology icons folder shown below should load automatically.
If not, double-click the zip le to open. Next, double-click the DMG le to open the
G-Technology icons package.
3. Click to select the drive icon for G-RAID with Thunderbolt in the package window. Press
Command+C to copy the icon.
To Next Page
Loading...
