p.18
Maintenance for Your Drive
Restore the Drive Icon
If the G-RAID TB drive icon was erased during the conguration process (see the
previous section), you can restore the icon with the following easy steps.
NOTE: This process is not required for the operation of the G-RAID TB. However,
it will make your drive’s appearance on the computer desktop look nicer and
more accurate.
1. To get the G-Technology icon package, go to www.g-technology.com/support
and navigate to your product. There will be a link to download the icons.
2. Once downloaded, it should automatically open the G-Tech Icons folder as
shown below. If not, double-click the Zip le to open. Next, double-click the
DMG le to open the G-Tech Icons package.
3. Click to select the drive icon for G-RAID TB in the package window. Press
Command+C to copy the icon. (below)
restore
To Next Page
Loading...
