PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE
24
Remark:
1.Focal length reference range: normal focal length 211mm/261mm or using
positive or negative defocus mode.
2.Line spacing: reference line spacing 0.001--0.008.
3.Filling angle: The filling angle can be adjusted by 90 ° or 45 ° as needed, or
cross-filled.
4.Pass times (marking times): The number of passes of the same color block also
affects the color change.
5.You can set parameters by setting different pen numbers (layers).
Color engraving template parameter：
X.G2 color engraving instruction
211mm/261mmStainless Steel 0.002 0° 1000mm/s 10%-50% 20-60khz
1-2
Number
of passes
Frequency
PowerSpeedFilling AngleLineFocal LengthMaterial
To Next Page
Loading...