Gaggia La Giusta - Water Connection

English

62
#FGPSFQSPDFFEJOHXJUIJOTUBMMBUJPODIFDLUIBU
• there are no bumps, signs of knocks or deformities
• there are no damp patches or marks which could lead one
to assume that the packaging has been exposed to the
elements
• there are no signs of tampering
0ODFPOFJTTBUJTGJFEUIBUUSBOTQPSUBUJPOIBTCFFO
DPSSFDUMZFGGFDUFEQSPDFFEXJUIJOTUBMMBUJPO
Make sure the appliance is
installed on a flat surface
capable of bearing its
weight (see "Technical
specifications" chapter) and
take care of leaving a clear
area of at least 30 cm
around the machine.
The least height of the
support’s top must be 110
cm (the highest surface of
the appliance shall
however be at least 1.5 m
from the ground level).
the gradient of the
supporting surface should
NOT exceed 2°;
1SPDFFEXJUIJOTUBMMBUJPOGPMMPXJOHUIFJOTUSVDUJPOT
BDDPSEJOHUPUIFTFRVFODFBTEFTDSJCFECFMPX
5.1 Water connection
Before connecting the
appliance to the water
mains, please read and
follow the applicable
regulations in force in your
country.
Water hardness should not
be lower than 8°F.
The machine should be
supplied with water
treated with a descaling
device, particularly in case
of water with high content
of calcium and magnesium
salts (hard water).
Make sure the water mains
provides drinking water,
with pressure ranging
between 0.15 MPA and
0.8 MPA (1.5 and 8 bars).
$POOFDUQVSJGJFS$UPUIFXBUFSNBJOT"