43
Before rst use
Installing the machine
1 Remove all packaging material from the machine.
2 Place the machine on a table or worktop away from the tap, the sink and heat
sources.
3 Leave at least 15cm of free space above, behind and on both sides of the
machine.
4 Insert the small plug into the socket located on the back of the machine.
5 Insert the plug into the wall socket.
6 Remove the protective sticker from the drip tray and slide the drip tray into the
guiding grooves in the front of the machine.
Note: Make sure the drip tray is fully inserted.
43
ENGLISH
4219-465-05501 MANUAL GAG. BESANA EN KOR.indd 43 12/02/2021 11:18:37
To Next Page
Loading...
