46
Manual rinsing cycle
During the manual rinsing cycle, the machine brews one cup of coffee to prepare
the inner circuit for use.
1 Place a bowl under the coffee spout.
2 Make sure the on/off button lights up continuously.
3 Press the regular coffee button.
- The machine starts to brew a cup of coffee to prepare the inner circuit for
use. This coffee is not drinkable.
4 Empty the bowl after the brewing cycle is nished.
5 Place a bowl under the hot water/steam wand or classic milk frother.
6 Turn the control dial to the hot water icon.
7 Let the water ow until the water tank is empty.
- The ‘water tank empty’ light lights up continuously.
8 Turn the control dial back to the coffee bean icon.
ENGLISH
46
4219-465-05501 MANUAL GAG. BESANA EN KOR.indd 46 12/02/2021 11:18:43
To Next Page
