Galanz GLOMJA17S2B-10 - Operation: Basic Functions; Cooking and Timer Functions; Defrosting by Weight

INSTALLING YOUR MICROWAVE
10
Installing your microwave
Step 1: Find the wall studs
1 Using an edge-to-edge stud nder, locate the edges of the wall stud(s) within the opening.
2 Mark the center of each stud, and then draw a vertical line down the center of each stud.
WARNING: Your microwave must be connected to at least one wall stud.
WARNING: The center of any adjacent wall studs should be 16" or 24" from this mark.
You’ll need:
Wall
stud
Center of the
wall stud
Pencil
Ruler or tape measure
Edge-to-edge stud nder