Galanz GLOMJA17S2B-10 - Step 8: Option a - Connecting Ductwork

INSTALLING YOUR MICROWAVE
21
Step 8: Option A - Connecting ductwork
1 Open the cabinet and slide the exhaust adapter front-to-back or side-to-side to adjust.
2 Extend the house duct down to connect to the exhaust adapter.
3 Seal the exhaust duct joints with duct tape.
4 You’re nished! Skip to
.
You’ll need:
Blower plate
Exhuast adapter
Damper
Back of microwave
House duct
Duct tape