INSTALLING YOUR MICROWAVE
35
10 If you have recessed cabinets:
• Make two ller blocks out of scrap wood pieces the size of shaded areas G and H. They must be as thick as the depth
of the cabinet recess.
• Drill 5/8" holes in the ller blocks to align with points D and E.
• Align the blocks with the corresponding holes in the cabinet. They should be at the same level as the bottom edge of
the cabinet frame.
You’ll need:
Filler blocks
Electric drill with 1/2” and
5/8” bits
Duct tape
Scissors
(recessed cabinets only)
Safety goggles
Saw
(saber, hole, or keyhole)
Ruler or tape measure
Filler blocks or scrap wood pieces
(for recessed cabinets only)
Top Cabinet Template
To Next Page
Loading...
