After turning on your refrigerator, the ice will start
to be made between 12 and 24 hours.
The ice maker produces 3.5 lbs ice per day,
depending on the temperature of the
freezer, the times in which the door opens,
and other conditions (amount of food
in the freezer, etc).
In order to turn on/off the ice maker, press
the power button for 2 seconds.
Power Button
Sensor
The ice maker will fill up (and start making ice) between 12 and 24
hours after the refrigerator is turned on.
Throw away the first batch of ice. Make sure that nothing
interferes with the sensor.
When the ice reaches the sensor, the ice maker will stop making
ice immediately.
It’s normal that some ice gets stuck. If the ice is not used
frequently, the older cubes of ice will be opaque in color, smaller,
and with a strange flavor.
The ice maker is not producing ice or not
enough ice.
- If it is new installation. Wait 12 to 24 hours after
icemaker installation for ice production to begin. It will
take 72 hours for full ice production.
- Check if the refrigerator is connected to a water supply
or the supply shut off valve is turned on.
-Reverse osmosis filtration systems can reduce the water
pressure below the minimum amount and result in
icemaker issues.
-A kink in the line can reduce water flow. Straighten the
water source line.
-Confirm ice maker is in the ON position.
-The recommended temperature for the freezer
compartment for normal ice
production is 0°F. If the freezer temperature is warmer, ice
production will be affected.
-If the doors are not properly closed, ice production will
be affected.
Ice Maker (on some models)
USAGE
16
USAGE
To Next Page
Loading...
Need help?
General
