REVERSE AND INSTALL THE DOORS
REVERSE AND INSTALL THE DOORS
7
and keep for future reference. For service, support and warranty i
nfo
rmation, call 800-562-0738.
?2019 Galanz Americas Limited C
ompany
INSTALLATION INSTRUCTIONS
You can choose to open your refrigerator to the right or the
left.
To change the way of opening, please follow the below instructions
Important safety warning: before doing so please unplug and
disconnect the appliance
In addition to the Accessories packed, you still need:
Medium-sized cross screwdriver
Small screwdriver
One more person who can help you would be better.
1.Unplug your refrigerator from the outlet.
2.Open the upper door, and close the bottom drawer.
6. Pry off the screw cover on the top left side of the
refrigerator to uncover the screw holes.
7. Relocate screw cover on the top left side of the refrigerator
to the right top to cover the holes.
3. Take off the protective covers with a Phillips screwdriver
through the back side, and save the protective covers.
4. Take off the 3 shelf-tapping screws, and save them.
5. Push the top hinge forward, remove the door and set it aside.
8. Remove the right-hand screw hole plug and Swap the
handle position from left to right. See the handle installation
instructions for door handle installation steps.
To Next Page
Loading...
Need help?
General
