Galanz W60B1A401L-A User Manual

Dishwasher
Edition: 2013-11 Model: W60B1A401L-A、W60B2A401L-A
Page 8 / 28
5 . Fault finding
Resolving m inor problem s yourself
Experience has shown that you can resolve m ost problem s t hat rise during
norm al daily usage yourself, without having to call out a service engineer.Not
only does t his save costs,but it also m eans t hat the appliance is available for use
again t hat m uch sooner. The following list of com m on occurrences and their
rem edies should help you ident ify the causes of m ost problem s.
Problem s...
...when t he appliance is swit ched on
Appliance does not st art up
- -Fault wit h fuse in m ains elect ricity supply.
- -Plug not insert ed in wall socket.
- -Appliance door not closed properly.
- -Program m e but t on has not been pressed.
- -Wat er t ap not t urned on.
- -Blocked st rainer in wat er int ake hose.
- -The st rainer is situat ed in t he Aqua- st op or supply-hose connect ion.
Service Diagnostics Cycle Notes
Press t he “ Power” and “ Delay “ but t ons, aft er t he buzzer em it s 2 short signal, all
the LED indicat ors will be lighted, t he LED display shows 888, t he dishwasher
ent ry t he service diagnostic cycle.
Fill Press” Program m e” butt on
The inlet valve work about 1 m inut e
Dispenser Press “ delay” but t on The dispenser work 60 seconds
Mot or Aut o The washing pum p work about 1 m inut e
Heat er Aut o
The water will be heat ed up 60℃
Drain Press” Program m e” butt on
The drain pum p work about 1 m inute
Fill Press “ delay” but t on The inlet valve work about 1 m inut e
Mot or Press” Program m e” butt on
The washing pum p work 3 m inut e
Soft ener Press “ delay” but t on The soft ener work 90 seconds
Drain Press” Program m e” butt on
The drain pum p work about 1 m inute
End Press “ delay” but t on The buzzer em it s 1 signal and t he display

Galanz W60B1A401L-A Specifications

General

Brand	Galanz
Model	W60B1A401L-A
Category	Dishwasher
Language	English