Via Centallo, 136 - Centallo (CN) – ITALY
Tel 0171.718005 Fax 0171.718004
Operator’s and Maintenance Manual – Rotary Disc Mowers
21
o Replace worn or damaged drive shaft guards.
o When the machine is not connected to the power takeoff, the hydraulic
hoses and the drive shaft shall be properly secured to their support
elements.
Make sure that hydraulic hoses are properly
installed.
Check hydraulic hoses for wear and replace
them if necessary (anyway at least every 6
years).
o Detach the machine on level ground, with the cutter bar lowered to the
ground, with the aid of the stand. Make sure that the machine is level.
o Before performing maintenance under raised parts of the machine secure
them using suitable blocks.
ATTENTION!
Never stand between the tractor and the mower when
the engine is running and the power takeoff is engaged.
ATTENTION!
Make sure that the discs have stopped before
approaching the machine.
WARNING!
The operator shall only perform maintenance as
recommended in the manual.
To Next Page
Loading...
