4
Gallagher TW- Weigh Scale Quick Start Guide
English
INSTALLATION
Installing the TW-
The TW- can be placed on a table top or mounted
on the bracket supplied.
Installing the Scale bracket
The bracket can be mounted on a fl at ver cal surface, a round post, or a rail.
To mount the bracket on a fl at ver cal surface, or a round wooden post, use
the 4 x tek screws included with the unit.
To mount the bracket on either a ver cal or horizontal bar, use the ‘U’ bolts
included with the unit.
Important:
It is not recommended to mount the TW- bracket on the weighing crate or chute
as interac on with the scale can impair weighing performance.
To Next Page
Loading...
