Gallagher HR4 - Power and Charging Options; Charging the Handheld EID Reader

20
3E3020 Gallagher HR4 Hand Held EID Tag Reader User Manual
English
POWER OPTIONS
When the HR4 is fully charged, it is expected to operate for 3–4


adapter. Fastest charging is achieved via the mains adapter when

Important:

power. 
Note: Tags cannot be read while the Reader is connected to
 The Reader will operate while being charged using

while the Reader is in use with the backlight on.
Charging the Handheld EID Reader

• a 5 VDC USB mains power adapter
• the 12–24VDC USB car charger included with the Reader
• 
Connect the components needed (supplied with your HR4) for
your preferred charging method as shown below and plug into the
necessary power source for your charger.
USB Cable connector
5 VDC USB charger



USB Cable
Black Red