Need help?Do you have a question about the GAMDIAS APOLLO E2 ELITE and is the answer not in the manual?
Align and secure the 3.5-inch HDD into its mounting holes using screws.
Align and secure the 2.5-inch SSD into its mounting holes using screws.
Details 120mm or 140mm fan compatibility for the top chassis area.
Details 120mm, 140mm, or 200mm fan compatibility for the front chassis area.
Details 120mm or 140mm fan compatibility for the rear chassis area.
Details 120mm fan compatibility for the bottom chassis area.
Specifies 280mm or 240mm radiator support for the top mounting location.
Specifies 360mm or 280mm radiator support for the front mounting location.
Specifies 140mm or 120mm radiator support for the rear mounting location.
Identifies front panel ports: Power, LED Control, USB 2.0, Headphone, Mic, USB 3.0.
Illustrates common front panel connectors: USB, audio, power, LED, and reset switches.
General| Type | Mid Tower |
|---|---|
| Color | Black |
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| Expansion Slots | 7 |
| Cooling Support Front | 3 x 120mm or 2 x 140mm |
| Cooling Support Top | 2 x 120mm or 2 x 140mm |
| Cooling Support Rear | 1 x 120mm |
| Radiator Support Front | Up to 360mm |
| Radiator Support Top | 240mm |
| Radiator Support Rear | Up to 120mm |
| CPU Cooler Height Support | 160mm |
| Material | Steel |
| Drive Bays | 2 x 2.5" |
| Pre-installed Fans | 1 x 120mm (Rear) |
| Front I/O Ports | USB 3.0 x1, USB 2.0 x2, HD Audio x1 |
| PSU Support | ATX |
To Next Page
