Need help?Do you have a question about the GAMDIAS APPOLLO E2 and is the answer not in the manual?
General| Model | APPOLLO E2 |
|---|---|
| Case Type | Mid Tower |
| Color | Black |
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| Expansion Slots | 7 |
| CPU Cooler Height Support | 160mm |
| Material | Steel, Plastic |
| Drive Bays | 2 x 3.5" / 2 x 2.5" |
| Fan Support | Front: 3 x 120mm or 2 x 140mm, Top: 2 x 120mm, Rear: 1 x 120mm |
| Radiator Support | 240mm, 120mm |
| PSU Length | 180mm |
Specifies compatibility for top-mounted fans, supporting two 120mm or two 140mm fans.
Details front fan compatibility, allowing three 120mm, two 140mm, or two 200mm fans.
Outlines rear fan support, which accommodates one 120mm or one 140mm fan.
Specifies support for two 120mm fans on the bottom of the case.
Details compatibility for a 240mm radiator at the top of the case.
Specifies front radiator support, accommodating 360mm or 280mm radiators.
Indicates compatibility for a 120mm radiator at the rear of the case.
Identifies front panel ports: Power, Reset, Fan LED Control, Headphone, Mic, USB 2.0, USB 3.0.
Advises consulting the motherboard manual for front panel header pinouts and locations.
To Next Page
