Need help?Do you have a question about the GAMDIAS MARS M2 and is the answer not in the manual?
General| Model | MARS M2 |
|---|---|
| Case Type | Mid Tower |
| Color | Black |
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| Expansion Slots | 7 |
| Maximum GPU Length | 350mm |
| Maximum CPU Cooler Height | 160mm |
| Power Supply Support | ATX |
| VGA Length | 350mm |
| Material | Steel |
| Drive Bays | 2 x 2.5", 2 x 3.5" |
| Cooling Support | Front: 3 x 120mm, Top: 2 x 120mm, Rear: 1 x 120mm |
| Radiator Support | Front: 280mm / 240mm, Top: 240mm / 280mm, Rear: 120mm |
| Pre-installed Fans | 1 x 120mm (Rear) |
| Front Ports | USB 3.0 x 1, USB 2.0 x 2 |
Instructions for removing the side panel from the computer case.
Install the motherboard in its proper location and secure it using screws.
Place the Power Supply Unit (PSU) in the correct position within the case.
Align the 3.5-inch HDD into the mounting holes and screw it in.
Align the 2.5-inch SSD into the mounting holes and screw it in.
Compatibility for fan sizes (120mm or 140mm) at the top of the case.
Compatibility for fan sizes (120mm or 140mm) at the front of the case.
Compatibility for fan size (120mm) at the rear of the case.
Compatibility for radiator sizes (280mm or 240mm) at the top of the case.
Compatibility for radiator sizes (280mm or 240mm) at the front of the case.
Compatibility for radiator size (120mm) at the rear of the case.
Description of the Power Button functionality.
Instructions for controlling LEDs using the LED Control Button.
Consult motherboard manual for front panel header locations and pin-outs.
To Next Page
