To Next PageTo Next Page
Need help?Do you have a question about the GAMDIAS Mars E2 and is the answer not in the manual?
Guide on how to properly install the motherboard into the chassis and secure it.
Steps for correctly positioning and installing the Power Supply Unit (PSU).
Instructions for mounting 3.5-inch HDDs into the case's designated holes and securing them.
Instructions for mounting 2.5-inch SSDs into the case's designated holes and securing them.
General| Type | PC |
|---|---|
| Material | ABS, SPCC, Steel, Tempered glass |
| Form factor | Micro Tower |
| Side window | Yes |
| Suitable for | Gaming |
| Product color | White |
| Illumination color | Multi |
| Maximum PSU length | 160 mm |
| Number of 2.5\" bays | 2 |
| Illumination location | Internal |
| Number of 5.25\" bays | - |
| Maximum CPU cooler height | 165 mm |
| Number of expansion slots | 4 |
| Maximum graphics card length | 350 mm |
| Supported motherboard form factors | ITX, Micro ATX |
| Power supply included | No |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Rear fans installed | 1x 120 mm |
| Top radiator sizes supported | 240, 280 mm |
| Rear fans diameters supported | 120 mm |
| Front fans diameters supported | 120, 140 mm |
| Number of rear fans supported (max) | 1 |
| Supported HDD sizes | 2.5, 3.5 \ |
Weight and Dimensions| Depth | 397 mm |
|---|---|
| Width | 210 mm |
| Height | 425 mm |
| Weight | 5640 g |
