What to do if Game ready 550550 says no wrap is attached?
If the Game Ready Control Unit displays a 'No Wrap Attached' message, first ensure a Wrap is properly attached. If it is, try disconnecting and reconnecting the connections between the Connector Hose and the Control Unit, as well as the Connector Hose and the Wrap.
What does 'Self-Test Error – Fluid Circuit' mean on Game Ready Control Unit?
If your Game Ready Control Unit displays 'Self-Test Error – Fluid Circuit' upon start-up, it indicates an electronic problem in the fluid circuit. To resolve this: * Disconnect the Wrap from the Control Unit. * Turn the Control Unit off and on again without a Wrap connected.
What does 'Self-Test Error – Air Pump' mean on Game ready 550550?
If your Game Ready Control Unit displays 'Self-Test Error – Air Pump' on start-up, it indicates an electronic problem in the air circuit. To address this: * Disconnect the Wrap from the Control Unit. * Turn the Control Unit off and on again without a Wrap connected.
How to fix 'Deflation Error' on Game ready 550550?
If your Game Ready Control Unit displays a 'Deflation Error', indicating the Wrap hasn't properly deflated, follow these steps: * Turn the Control Unit off. * If there's air left in the Wrap, disconnect it from the Connector Hose and manually deflate it. * Reconnect the Hose to the Wrap and reapply the Wrap to the body. * Turn the Control Unit on and press play/pause.
Why does my Game ready 550550 Control Unit display 'Pump Performance Error'?
A 'Pump Performance Error' on your Game Ready Control Unit means the fluid pump may be working too hard, possibly due to ice or debris in the fluid circuit. To resolve this: * Turn the Control Unit off and back on again. * Check to see if the filter is clogged. If the problem persists, turn the Control Unit off for 20 minutes to let the pump cool down before trying again.
What to do if my Game ready 550550 displays 'Over Pressure'?
If the Game Ready Control Unit has exceeded the target pressure, resulting in an 'Over Pressure' message, try the following: * Turn the Control Unit off and back on. * Apply the same Wrap more tightly. * Apply a different Wrap.
What to do if Game ready 550550 Control Unit shows 'Under Pressure'?
If the Game Ready Control Unit can’t reach its target maximum compression and shows 'Under Pressure', this often indicates a leak in the pneumatic compression circuit (Connector Hose, Wrap, or Control Unit) or worn hook and loop fasteners on your Wrap. Make sure the Wrap is tightly applied. Try using a different Wrap and Hose to isolate the problem.
What to do if my Game ready 550550 won't turn on?
If your Game Ready Control Unit fails to turn on, ensure the AC Adapter is securely plugged into a working electrical outlet. Press the power button again. If the orange LED on the control panel is illuminated, but the Control Unit will still not turn on, call 1.888.426.3732. If no orange or green light is illuminated, check that the electrical outlet has power.
What to do if the Game ready 550550 displays 'Low Flow'?
If your Game Ready Control Unit shows a 'Low Flow' error, indicating an interruption in the water flow, you should: * Check all hose connections. * Ensure there is water in the ice box. * Verify that the ice box filter is not clogged. * Make sure there are no kinks in the Wrap or Connector Hose. * Turn the Control Unit off and on again. * Disconnect and reconnect the hose from the Control Unit and the Wrap.
What to do if my Game ready 550550 shows 'Dry Pump'?
If your Game Ready Control Unit displays a 'Dry Pump' error, indicating the unit has detected a dry pump and stopped therapy to prevent damage, take the following steps: * Ensure there is water in the ice box. * Check that the ice box filter isn't clogged. * Make sure there are no kinks in the Wrap or Connector Hose. * Turn the Control Unit off and on again. * Turn the temperature knob to full cold until flow has been established. * Disconnect and reconnect the hose from the Control Unit and the Wrap. Prime the Wrap and System as described in the manual.
Lists and describes the components included in the Game Ready System.
Overview of the Control Unit's display, buttons, and temperature adjustment knob.
Instructions and information on how to register the Game Ready product.
Provides contact information for learning more or sharing experiences with the Game Ready System.
Details how to adjust time and pressure settings in Manual Mode.
Explains how to select and use preset treatment programs.
Instructions for using the Drain Mode to empty water from the ice box.
Details the function of each button on the Control Unit for operation.
Guidance on how to adjust the cold therapy temperature using the control knob.
Explains the meaning of status bar icons, other icons, and temperature displays.
Visual guide on turning the temperature knob for less or more cold therapy.
Shows how run time and sleep time countdown bars are displayed during Program Mode.
Illustrates the display of run time countdown bars in Manual Mode.
Depicts the display when selecting a program, showing pressure and time.
Illustrates the different pressure level indicators on the Control Unit display.
Lists the necessary components required to operate the Game Ready System.
Instruction to push the door release button to open the ice box door.
Instruction to fill the ice box completely with ice and water.
Instruction to close the ice box door securely, ensuring it clicks.
Guidance on placing the Control Unit in the correct upright orientation to prevent leaks.
Instructions for connecting the AC Adapter and checking the power indicator light.
Instruction to connect the larger end of the Connector Hose to the Control Unit.
Advice on applying the selected wrap and important warnings regarding its use.
Instruction to connect the smaller end of the Connector Hose to the Wrap securely.
Steps to power on the Control Unit, check indicator lights, and establish cold flow.
Guidance on choosing between Manual and Program modes and setting time/pressure.
Instruction to press the play/pause button to start the treatment session.
Instructions on how to adjust the cold therapy temperature using the knob.
Lists conditions and patient types for whom compression or cryotherapy should not be used.
Lists specific patient groups and conditions that require caution or supervision during use.
Specific warnings for cryotherapy use under supervision for certain medical conditions.
Provides critical warnings regarding tissue damage, wrap placement, and intended use.
Lists precautions to prevent electrical shock, damage, or malfunction of the device.
Details the system's classification regarding protection against electric shock.
Describes the product's level of protection against water ingress.
Classifies pollution degree and suitability for use with flammable anesthetics or oxygen.
Explains compliance with medical device limits for electromagnetic interference.
Provides instructions and cleaning agents for the Control Unit exterior and reservoir.
Details cleaning methods and recommended agents for the Connector Hose.
Instructions for hand washing the Sleeve and cleaning the Heat Exchanger.
Guidance on cleaning the Carry Bag using various cleaning agents.
Instructions for inspecting and cleaning or replacing the ice box filter.
Steps for storing the Control Unit after use, including emptying water and drying.
Details recommended storage temperature, humidity, and environmental precautions.
Provides the physical dimensions and weight specifications of the Game Ready System.
Details the pressure levels and power requirements for the Control Unit.
Lists compatible accessories that can be used with the Game Ready Control Unit.
Explains the meaning of an Air Pressure Sensor error and how to resolve it.
Details the Self-Test Error for the Air Pump and troubleshooting steps.
Describes the Dry Pump error and actions to prevent damage to the fluid pump.
Explains the Over Pressure error and measures to take when target pressure is exceeded.
Addresses the Under Pressure error, indicating issues reaching maximum compression.
Explains the Deflation Error and steps to ensure the Wrap deflates properly.
Details the Pump Performance Error and potential causes like ice or debris.
Describes the Low Flow error, indicating an interruption in water flow.
Explains the Self-Test Error for the Fluid Circuit and when the unit won't turn on.
Details the one-year warranty for the Game Ready Control Unit against defects.
Provides instructions on contacting customer service and obtaining an RMA for warranty service.
Outlines limitations and exclusions to the express and implied warranties provided.
Specifies limitations on CoolSystems' responsibility and remedies for warranty breaches.
Instructs users to complete warranty registration online using model and serial numbers.
Provides information on the availability of extended warranties for the Game Ready System.
General| Brand | Game ready |
|---|---|
| Model | 550550 |
| Category | Control Unit |
| Language | English |
To Next Page
