Gamko E3 VS - Safety Precautions

23
E3/VS line
Safety precautions
Technical safety
• Check the power supply to ensure it is suitability for this device.
• Make sure the product is positioned rm and level.
• Always engage a qualied service technician for repairs.
• If the power cord is damaged, it should only be replaced by the manufacturer or a qualied technician
to avoid danger.
Refrigerant
• This unit must be connected to a refrigerant refrigeration system. The type of refrigerant for which the
cooling is suitable is stated on the type plate.
• Contact with liquid may cause cold burns;
• Exposure to low concentrations may lead to dizziness, headache, nausea and loss of coordination;
• After contact with liquid, ush with water for at least 15 minutes. Obtain medical assistance;
• Exposure to re may cause containers to rupture or explode;
• Make sure the area around the appliance is always well ventilated;
• Never open an area that is suspected of having a refrigerant leakage.
During operations
• Use this product only in a dry and clean environment.
• Use this product exclusively for cooling of packaged beverages.
• Never use the device as a stepping stone.
• Never place electrical appliances inside the appliance.
• Make sure the grilles are not blocked, both outside and in the cooler.
• Make sure the ambient temperature does not exceed the class climate.
After use
• Take care to provide safe storage / disposal of the waste product (see WEEE regulations).
EMERGENCY STOP
ISOLATE FROM THE POWER SUPPLY