31
Procedure to Change a Label
If you are making a custom-printed label, edit the Excel
®
file and print a label sheet as described above. If
you are using the Gamry-supplied label sheet, identify the location on the sheet where the new label is
found.
1) If you are writing by hand on a blank label, do it now.
2) Use scissors to cut out the new label. Cut white labels on the black lines.
3) Unscrew the four Philips-head screws on the front bezel, and remove the instrument’s front bezel
(the black frame around the front panel). See Figure 4-5.
Figure 4-5
Removing the Front Bezel
4) Your instrument should now look like Figure 4-6 (the front bezel is removed). Notice the white tab
on the left side on the instrument. This is part of the old label.
To Next Page
Loading...
