32
Figure 4-6
Instrument with Bezel Removed - Label Tab Seen
5) Pull gently on the paper tab on the left side of the front panel to remove the existing label. You
need to pull out about 5 cm of label.
6) Insert the new label in the same spot as the old label. The text should face the front of the
instrument. A small tab of paper extends beyond the instrument’s front panel.
7) Examine the new label’s position in the Front Panel. Adjust the label if needed.
8) Replace the black bezel. Reattach the four screws to fix the bezel in place.
9) Rename the Reference 600+ in the Gamry Framework software to match the new label. Use the
Framework Options, Instrument... dialog box. In the resulting dialog box, select the device you
want to rename and then select the Device Settings... button.
To Next Page
Loading...
