102
12.1.2. Language Setting
"Language Setting" is used to select the language to be displayed on the control panel.
1. Press "Menu" to enter the menu setting interface.
2. Press "▲" or "▼" to select "System Setting" and then press "OK".
3. Press "▲" or "▼" to select "Language set" and then press "OK" to do language setting.
12.1.3. Restore Factory Settings
“Restore factory settings” is used to recover the default settings of printer. The printer will restart
itself automatically after recovering factory settings.
1. Press "Menu" to enter the menu setting interface.
2. Press "▲" or "▼" to select "System Setting" and then press "OK".
3. Press direction key "▲" or "▼" to select the "Restore set" option and press "OK".
• Factory settings of network printer can be recovered via embedded Web server (please
refer to Chapter 6.2.4) .
To Next Page
Loading...
Need help?
General
