GL7p - Battery-powered, door-mounted electronic locker lock GL7p
Configuration
42
HB_GL7p--EN_12
www.gantner.com
Figure 5.8 – Device update wizard - Reader selection
► Select the readers that require a firmware update.
- Quintec BLE Module: The wireless module for identification via radio connection (only for the GL7p.2xxx and
GL7p.3xxx locks).
- RFID module: Standard RFID reader that reads the data carriers when the button is pressed.
► Click on "Next".
o GAT Config Manager searches the GANTNER server for new firmware versions for the selected type
(GL7p main device or the selected reader type). If a connection to the server cannot be established, or
no new firmware versions are found, a corresponding message is displayed. In this case, click "OK".
o A window with the available updates is displayed.
Figure 5.9 – Device update wizard - Select firmware version or local firmware file
To Next Page
Loading...
