GAPOSA QC101 - CANCELLATION OF THE AUTOMATIC CLOSING MODE; Clearing Pause Time and Disabling Mode

16 pages

To Next Page

To Previous Page

CANCELLATION OF THE

AUTOMATIC CLOSING MODE

This procedure clears the pause time and then excludes the automatic

closing.

1. Put DIP 5 and 6 in OFF

2. Put DIP 5 in ON and within 3 seconds put it again in OFF.

If cancellation has been accomplished correctly, the red LED will

ﬂash quickly and then switch off.

Then the green LED will switch on steady.

Other manuals for GAPOSA QC101