GARANT KOMPAKT - Fitting the Storage Shelf; Fitting the Side Panels; Assembling a KOMBI Hexagon Workbench

4.3.2 Fitting the storage shelf
The side faces of the support cross braces carry holes for securing the
storage shelf.
X
Position the storage shelf
between the cross braces
on the supports, and screw
it on.
X
Tighten the screws on the
support legs.
4.3.3 Fitting the side panels
The inner faces of the support legs carry holes for securing the side panels.
X
Stand the workbench back
on its feet.
X
Position the side panel
between the support legs
and screw it on.
4.4. Assembling a KOMBI hexagon workbench
X
Position all drawer unit shells as shown on the dimensioned drawing.
2160
1250
2500
X
Place both halves of the
worktop on the drawer unit
shells.
X
Precisely position the joint
cover strips.
X
Insert the connector clips
and tighten the screws.
X
Align all the drawer unit
shells.
X
Maintain the correct
projection of the worktop
at the tops of all drawer
unit shells.
30 mm
www.hoffmann-group.com
DE
EN
FR
IT
ES
3130
DE
EN
FR
IT
ES