7. Disassembly
X
Clear loose parts from the workbench and clean it.
X
Disassemble the workbench in the reverse order to assembly.
8. Maintenance
X
Regularly check all components and screw fastenings on the workbench
for tightness, good condition and operation.
X
If there is any damage to the workbench, to its components or accessory
parts, or any doubts about its safety:
Block access to the workbench and prevent its use.
Have the damage repaired immediately.
Replace damaged components and accessory parts immediately.
9. Cleaning and servicing
CAUTION!
Damage to the surface of the worktop due to use of unsuitable cleaning
agents.
X
Do not use abrasive cleaners for surface cleaning.
X
Clean and grease the locks, wheels etc. with multi-function oil.
X
Clean side panels and metal fronts, drawers and feet with paint cleaner.
X
Wipe down the worktop of the workbench with a moist cloth.
10. Disposal
X
Disposal of the workbench and all accessory parts in accordance with
local regulations.
11. Spare parts and accessories
Spare parts:
obtainable from the Hoffmann Group:
www.hoffmann-group.com
Accessories:
Vices, drawer dividers, workbench fittings etc.
Ä
“Main catalogue” and “workstations and storage catalogue” of the
Hoffmann Group
12. Technical data
Workbench max. load*
[kg]
Comment
KOMPAKT
93 0950 1000 –
93 1000 – 93 1900 1500 –
KOMPAKT L
93 2000 – 93 2800 1200 –
93 3050 – 93 3080 1200 mobile: 400 kg
93 3200 – 93 3245 800 –
KOMPAKT H
93 4400 – 93 4450 1200 –
93 4500 – 93 4530 1200 mobile: 400 kg
93 4600 – 93 4650 800 –
KOMBI
93 3250 – 93 3450 400 Worktop / 2× feet
800 Worktop / 2× feet / rear
panel
1000 Worktop / feet / drawer
unit shell
1000 Worktop / 2× drawer
unit shell
93 3308 1000/M 400 –
93 3308 1000/1AM 500 –
KOMBI hexagonal workbenches
93 3500 2000 –
*distributed load
12.1. Permissible loads
Workbench weight [kg] Anchoring
to the floor
max. load capacity* per
drawer [kg]
>150 – max. 100
<150 – max. 35
max. 100
*distributed load
To Next Page
Loading...