X
Mark out the drilling
positions through the holes
in the support legs.
X
Move the workbench aside
and drill the anchor holes.
Diameter: 8 mm
Depth: 60 mm
X
Insert plugs. Comply with
the manufacturer's data
regarding the plugs.
X
Position the workbench
precisely at the erection
position over the anchor
holes.
X
Bolt the workbench to the
floor.
Ø 8 mm
6. Application
WARNING!
Risk of injury due to the workbench tipping over and workpieces falling
from it.
If workpieces overhang the edge of the workbench there is a risk of tipping
over.
X
Where necessary, anchor the workbench to the floor.
X
Secure the overhanging workpieces.
X
Before using the workbench, always check it for damage.
X
Keep the workbench and accessory parts clean.
6.1. Mobile workbench / roller cabinet
d
➀ Worktop
➁ Frame
➂ Individual locking
➃ Castor with parking brake
➄ Fixed shelf
➅ Undercarriage that can be lowered
Mobile workbenches / roller cabinets which are not fitted with an
undercarriage, which can be lowered, are fitted with parking brakes on the
castors, which secure them against accidentally rolling away.
Mobile workbenches / roller cabinets must be secured before starting work.
When using mobile workbenches / roller cabinets, note the following
points:
Before moving it
X
Close all drawers, and ensure that the individual drawer catches have
engaged.
X
Close the central locking.
X
Remove all moveable and unsecured objects from the workbench/roller
cabinet.
X
Release the castor parking brakes, or raise the workbench using the
lifting mechanism.
X
Apply only your own body weight to move the workbench/roller
cabinet; push it only with walking speed.
If transporting on vehicles or in lifts
X
Secure the workbench/roller cabinet.
X
Comply with the safety instructions issued by the vehicle or lift
manufacturer.
To Next Page
Loading...