ELECTRIC VENTILATED OVENS
GB
47
3.3.1b - MODELS
25GL VAP / 45GL VAP / 46PL VAP / 61GL VAP / 64PL VAP / 101GL VAP / 104PL VAP
START/STOP BUTTON
Pressing START/STOP:
starts the cooking cycle. The internal light comes on.
The temperature display changes from showing the set point to
showing the chamber temperature and the corresponding LED
lights up until the set point is reached. It goes off beyond the
set point and comes back on again below the set point.
The timer display changes from showing the set point to showing
a countdown and the corresponding LED flashes, stopping
flashing at the end of the time.
The humidity display remains fixed at the value set and the
corresponding LED lights up when humidification is activated.
If not activated, the core probe display remains in a fixed position.
Pressing the STOP button again during the cooking cycle:
suspends the cooking cycle.
All the parameters set are maintained.
The cooking time will resume from the suspended time.
Pressing START/STOP again resumes the cooking cycle,
maintaining the parameters set (modified if applicable) at the
time.
At the end of the cooking cycle:
The tune will sound for 10 seconds or until the door is opened
and the oven switches to OFF.
Opening the door while the oven is operating is equivalent to
pressing the stop button, except that, when the door is closed
again, the oven starts again automatically.
pict. 24
To Next Page
Loading...
