TRENCHER TZ S
Use and maintenance instructions – Spare parts Via L.da Vinci,32/B
Rev. 01.2013 - EN (translation of the original instructions)
10
36034 Malo (VI) Italy
T E Z A
2- GENERAL
2.1- IMPORTANCE OF THE MANUAL
AUTHORISED OPERATORS MUST READ AND UNDERSTAND ALL PARTS OF THIS MANUAL
BEFORE USING THE MACHINE.
This technical “Use and maintenance instructions” manual was drawn up according to the contents of
the European directives in order to ensure the issues in question can be easily and correctly understood
by the operators authorised to use and service the machine in question. If, despite the attention paid by
the manufacturer while drawing up this manual, the above operators do not fully understand certain
points, they must promptly request the manufacturer for explanations and further information in order
not to make incorrect personal interpretations that would adversely affect safety.
Before using the machine in question, the authorised operators must read and fully understand all parts
of this technical “Use and maintenance instructions” manual and strictly follow the relative instructions
in order to guarantee their own safety and that of other people, optimise performance of the machine
and maximise the efficiency and lifetime of all its components. This manual must always be available to
authorised operators and must be safely kept nearby the machine.
THIS MANUAL MUST ALWAYS BE KEPT AVAILABLE FOR AUTHORISED OPERATORS AND
MUST BE SAFELY KEPT NEAR THE MACHINE.
THE MANUFACTURER DECLINES ALL LIABILITY FOR HARM TO PERSONS AND ANIMALS OR
DAMAGE TO PROPERTY CAUSED BY THE NON-OBSERVANCE OF THE INSTRUCTIONS AND
WARNINGS CONTAINED IN THIS MANUAL.
THIS MANUAL MUST BE DELIVERED TOGETHER WITH THE MACHINE IF THE LATTER IS
TRANSFERRED TO ANOTHER USER.
THIS MANUAL REFLECTS THE STATE OF THE ART WHEN THE MACHINE WAS PUT ON THE
MARKET AND CANNOT BE CONSIDERED INADEQUATE JUST BECAUSE IT IS
SUBSEQUENTLY UPDATED ON THE BASIS OF NEW EXPERIENCE.
IF THE MANUAL IS MISLAID OR DAMAGED, A COPY CAN BE REQUESTED FROM THE
MANUFACTURER, QUOTING THE IDENTIFICATION DATA OF THE MACHINE (SEE CE
MARKING) AND THE REVISION NUMBER.
2.2- CONSULTATION NOTES
THE GENERIC DANGER SIGNAL AND THE UPPERCASE TEXT IN A BOX ATTRACT THE
OPERATOR'S ATTENTION TO THE WARNINGS INDICATED IN THIS MANUAL.
To Next Page
Loading...
