Gard Pro ULTRA 2+ - Sedentary Reminder

Go to the breath test interface to start the automatic breath
measurement. Use the menu to re-measure.
Go to the breathing training function and follow the animation for
breathing rhythm training.
b. Training of breathing rhythm:
a. Automatic respiratory rate measurement:
PAGE 10
ULTRA 2+
16. BREATHING TRAINING
17. WATER DRINK REMINDER
a. Setting reminders:
At the bottom of the FitCloudPro app, go to ‘’Device‘’.
Select ‘’Water drink reminder‘’.
When the bar turns orange, the function is on.
Now you can set a start and end time and the desired interval.
i.
ii.
iii.
iv.
18. SEDENTARY REMINDER
a. Setting motion inhibitors:
i.
ii.
iii.
iv.
At the bottom of the FitCloudPro app, go to ‘’Device‘’.
Select ‘’Motion reminder‘’.
When the bar turns orange, the feature is on.
Now you can set a start and end time and a do not disturb time.
19. AUTOMATIC HEALTH CHECK
i.
ii.
iii.
iv.
At the bottom of the FitCloudPro app, go to ‘’Device‘’.
Select ‘’Automatic health check‘’.
When the bar turns orange, the feature is on.
Now you can set a start and end time.
a. Setting automatic readings over the day:
NOTE: This function requires a lot of battery power. This will reduce the
battery life considerably.