Gard Pro ULTRA 2+ - Heart Rate Monitoring



i.
ii.
iii.
iv.
i.
ii.
iii.
i.
ii.
iii.
During a sports activity, the GARD PRO continuously monitors your heart rate.
To use the heart rate monitor on your GARD PRO, follow these steps:
d. Enable/disable call notifications via vibration:
c. Message notifications via vibration enable/disable:
a. Turn on/off calling with the Gard Pro Ultra 2+:
ULTRA 2+
PAGE 07
8. CALLING AND APP MESSAGES
9. HEART RATE MONITORING
At the bottom of the FitCloudPro app, go to ‘’Device‘’.
Select ‘’Push notifications‘’.
Then press the bar to the right of ‘’Call‘’.
When the bar turns orange, you can call with the GARD PRO.
From the home screen, swipe down.
Select ‘’Vibration intensity‘’ to adjust the vibration function.
You can also turn off message notifications via vibration by
turning on non-intrusive mode. This is the ‘’moon‘’ icon after swiping down.
From the home screen, swipe down.
Select ‘’Vibration intensity‘’ to adjust the vibration function.
You can also turn off call notifications via vibration by
turning on non-intrusive mode. This is the ‘’moon‘’ icon after swiping down.
b. Enable/disable app notifications on the Gard Pro Ultra 2+:
At the bottom of the FitCloudPro app, go to ‘’Device‘’.
Select ‘’Push notifications‘’.
Then press the individual apps you want to receive notifications from on
your GARD PRO.
When the bar turns orange your messages will receive notifications.
i.
ii.
iii.
iv.
i.
ii.
iii.
From the home screen, swipe right.
Press ‘’HR‘’ and the GARD PRO will start measuring immediately.
The result of the measurement will now also appear on the home screen.
This depends on the chosen watch face. Not every watch face shows the
heart rate.