11 |
www.gardasoft.com
6 Using the RC120’s web pages
Once you have established a network that includes your RC120 controller,
you can manage it and any other controllers on your network.
You can set your RC120 controller up for continuous, switched, or pulsed
operation. An example of your RC120’s channel conguration page is
shown below:
7 Setting the rating of your light
You will need to set the rating of your light before using it. You can do this
by using the channel conguration web page of an RC120, or by using its
front panel buttons. You must use this method for setting the rating of a
light with an RC100. The section below explains how to set the light rating
using the front panel buttons.
To Next Page
Loading...
