5 |
www.gardasoft.com
Gardasoft RC100/120 controllers
Your Gardasoft RC100 or RC120 LED Lighting Controller is designed to be
quick and easy to use provided you set up the current of your light and
connect the controller to an internal or external trigger.
This guide is provided to help you get ‘up and running’ quickly and easily.
It covers connection to a power supply, a light, a PC, and to a trigger. It
also gives a brief description of the product – in other words, all you need
to know to get started.
Throughout this guide, the RC100 and RC120 are both referred to as
RC1xx unless otherwise indicated.
Before you start
Before you use this product, make sure you are satised that you
understand the section on Safety precautions and that you have checked
that the RC1xx controller fulls your requirements.
When you have done so, you are ready to connect and set up your RC1xx
controller.
The full User Manual for the RC1xx controller and application notes about
it can be found at www.gardasoft.com.
About your RC1xx
Your RC1xx is a single channel LED lighting controller that can be set up
from its front panel. Additionally, the RC120 can be set up through its own
web pages accessed from its Ethernet connection (see Section 5, “Ethernet
operation (RC120)”).
Before you can use your RC1xx, you must set the current rating for the
light you want to use. See Section 7, “Setting the rating of your light”. For
other settings, refer to the User Manual.
To Next Page
Loading...
