16
GB
3. Function
1
Time key: Selects date and time.
2
Channel key: Calls the channels.
3
Man. key: Manually opens / closes individual
channels.
4
% Run-Time key: Calls up the % run-time function.
5
Rain Off key: Selects a watering break.
6
▲-▼ keys: Changes data already entered.
(If you press and hold down the ▲-▼
keys you can change data in the quick
run-through mode.)
7
OK key: Confirms the settings you selected
using the ▲-▼ keys.
8
Date and time display:
Indicates the day of the week, date and current time.
9
Status display:
Indicates the current programming or watering status.
0
% Run-Time display:
Sets the duration of watering between 10
-
200% for all
channels.
A
Key lock:
Protects against unintentional changing of settings (the reset
function cannot be locked).
B
Battery status display:
When the Low Battery display flashes, the battery is almost
empty and has to be replaced.
When the Low Battery display appears, the battery is empty
or no battery has been inserted.
The Low Battery display is re-set once the new battery has
been inserted.
The Watering Controller must be used only for controlling
commercially available 24 V (AC) valves. The electric power
consumption per channel must not exceed 600 mA
(a GARDENA Irrigation Valve Art. 1278 requires 150 mA).
Please note
2. Safety Instructions
Watering Controller:
The Watering Controller must only
be operated with the 24-V (AC)
power supply unit provided.
v Protect the 24-V (AC) power supply unit
from moisture when connected.
The Watering Controller is not splash proof.
In order not to lose any data in the event of
power failure, an alkaline 9 V block battery
(type 6LR61) must be used for buffering data.
We recommend using batteries manufactured
by Duracell and Energizer (do not use
rechargeable batteries).
Keypad:
Watering Controller display:
7
1 2
3
4
5
6
8
9
B
F
E
0
A
G
C
D
To Next Page
Loading...
