To Next PageTo Next Page
Need help?Do you have a question about the Gardena C 1060 plus and is the answer not in the manual?
General| Compatible products | - |
|---|---|
| Material | Plastic |
| Product color | Black, Grey, Orange |
Details on how to properly install and position the Water Computer for optimal performance.
Guides on how to program the watering schedules and settings for the device.
Detailed explanation of all icons and indicators on the Water Computer's display panel.
Instructions on how to correctly insert a 9V battery into the Water Computer.
Detailed steps for connecting the Water Computer to different tap thread sizes.
Instructions for connecting optional soil moisture or rain sensors to the Water Computer.
Guide on how to attach an optional anti-theft device for added security.
Recommendation to plan watering schedules before programming the device.
Details the three different watering modes: Program-controlled, Automatic Water Distributor, and Sensor-controlled.
Instructions on how to set the display language for the Water Computer.
Step-by-step process to set the current time and day of the week on the device.
Detailed steps for entering program-controlled watering schedules (Prog 1-6).
Explains how to select watering cycles (e.g., every 24 hours) and watering days.
Instructions on how to activate or deactivate the programmed watering cycles.
Allows central adjustment of watering durations by 10% steps for all programs.
Explains how to use the device with an automatic water distributor for up to 6 lines.
Details on managing Prog 11, its interaction with Prog OFF, and sensor integration.
Guide to setting up watering based on soil moisture or rain sensor data.
Instructions on how to change existing watering program values.
How to manually open and close the water valve, and set manual watering duration.
How to restore factory settings, including zeroing program data.
Guidelines for storing the Water Computer during winter to protect it from frost.
Step-by-step guide on how to remove, clean, and reattach the filter.
