9
GB
The watering frequency can be selected by:
• the (7.) watering cycle (right hand column of the display)
– or –
• the (8.) watering days (left hand column of the display).
7. Select watering cycle with the rotary button
(E.g. 2nd) and confirm by pressing OK.
24h / 2nd / 3rd / 4th / 5th / 6th / 7th:
Watering every 24 hours / every 2. / 3. / 4. / 5. / 6. / 7. days
The week preview is displayed in the left hand column for
2 seconds.
The ticker
Select program no.
appears and the display
jumps back to Step 2 and the next program number up flashes.
– or –
8. Select each watering day with the rotary button
(E.g. Mo, Fr Monday and Friday) and confirm by
pressing OK.
The ticker
Enter watering days
appears.
9. Press the Menu button
The ticker
Select Program no.
appears.
The display jumps back to Step 2 and the next program
number up flashes.
If program number
66
has been created the ticker Watering
programs ON is displayed.
Prog
OONN
flash on the display.
If not all 6 programs are to be entered you can use the menu
button to switch to the “Start watering programs” display level.
The Prog
OONN
must be selected so that the watering programs
can start. If Prog
OOFFFF
is selected the watering programs do
not run.
1. Press Menu 3 times (not necessary if the program has already
been created with program number
66
).
2. Select the Prog
OONN
with the rotary button and confirm by
pressing OK.
The ticker
Programm OK
is displayed for 2 seconds and then
the display jumps to the normal display.
The Water Computer has now been programmed, i.e. the inbuilt
valve opens and closes completely automatically and thus waters
at the programmed times.
Even if the Prog
OOFFFF
is selected watering can be done manually.
7.
8.
Starting watering
programs:
2.
To Next Page
Loading...
Need help?
General
