Gardena FP 1000 E User Manual

FP 750 E Art. 7650
FP 1000 E Art. 7651
FP 1400 E Art. 7652
FP 1800 E Art. 7653
FP 2500 E Art. 7654
FP 4000 E Art. 7655
FP 5000 E Art. 7656
FP 7500 E Art. 7657
GARDENA
®
D Gebrauchsanweisung
Wasserspielpumpen-Set
GB Operating Instructions
Fountain Pump Set
F Mode d’emploi
Pompe pour jets d’eau
NL Gebruiksaanwijzing
Waterspelpomp-set
S Bruksanvisning
Fontän Pump Set
I Istruzioni per l’uso
Pompa per giochi d’acqua
E Manual de instrucciones
Bomba para juegos de agua
P Instruções de manejo
Bomba para fontes
DK Brugsanvisning
Springvandspumpesæt
D
GB
F
NL
SIEPDK

Gardena FP 1000 E Specifications

General

Brand	Gardena
Model	FP 1000 E
Category	Water Pump
Language	English

Summary

For Your Safety

Electrical Safety

Use residual current device (<= 30 mA) and disconnect from mains before work. Ensure proper grounding.

Assembly

Fit the pump

Attach filter housing to a base, screw nozzle pipe and water feature insert.

Mount additional filter on the pump

Extend maintenance interval by fitting filter shells on filter housing. Ensure sealing cover is pressed.

Mount pond edge controller

Initial Operation

Switch on water feature pump

Start pond edge control

Maintenance

Clean water feature insert and nozzle pipe

Clean filter housing

Clean the filter of the pond edge controller

Trouble-shooting

Clean the pump

Disconnect power, remove pump from housing, pull out and clean impeller unit. Reassemble carefully.

Service

Guarantee

3-year guarantee against material/manufacturing faults. Unit must be handled properly and not tampered with.